Wireless Bluetooth Portable Pulse Oximeter MSLPO-B

Wireless BlueTooth Portable Pulse Oximeter MSLPO-B

Parameters??

Three Parameters??SPO2??TEMP and Pulse Rate

Waveforms??

Waveform: SPO2 waveform-PLETH

Features??

• Monitoring SPO2, TEMP, PR & PLETH
• 2.8 inch color TFT LCD in real time display, displayable in big font and big screen
• BlueTooth wireless is very convenient to realize reviewing the measurements in big screen via connecting PC and to upload history data to PC for review, printing or storage 
• Unique software for telemonitoring by transmitting data synchronously via internet  
• Long time monitoring and sleeping monitoring
• Storage/Review trend data up to 3888 groups, data save time interval settable
• Audio and visual alarm when parameters exceeded and sensor-off
• Built-in rechargeable Li-ion battery, up to 15-hour running time
• Battery capacity indicator. Automatic shutdown for power saving
• 

Wireless BlueTooth Portable Pulse Oximeter MSLPO-B 

Applications??

The oximeter could be applied in the hospital’s operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.

Wireless BlueTooth Portable Pulse Oximeter MSLPO-B

Specifications:

1. General

Monitoring Parameters: SpO2??PR??PLETH??Pulse strength??TEMP

Signal sockets??SpO2 socket??TEMP socket??USB socket(for charge battery and transmit data)

2. Display screen            

Type: 240 × 320 dot matrix color TFT LCD screen

Display area: 43mm×58mm

3. Functions

PLETH: The monitor can display PLETH waveform

Intelligent parameter monitoring screen: The monitor automatically selects the parameter measurements to display according to the probes connected to the monitor.

Audio and visual alarm: The speaker sounds the alarm and the parameter’s measurement will become in red to flash on the screen. Also the same when sensor-off.

Prompting: Icons of battery capacity, pulse sound switch and alarm sound switch.

Power saving: The monitor will automatic shut down to save power. The time is settable.

Trend: Storage/Review trend data up to 3888 groups, data save time being set freely

Data storage: The saved data will never be lost even if the monitor is powered off.

Communication: Transmitting the patient’s trend to a PC for display, observation, saving and printing via USB or Bluetooth wireless

4. Electrical specifications

Working Voltage: D.C. 3.7V/3000mAH

AC power adaptor      

Input: AC 100 V??240V, 50/60Hz, 5VA

Output: D.C. 5V

Internal battery  

Type: D.C. 3.7V/3000mAH Li-ion rechargeable battery

Run Time: 15-hour continuous operation with a new, fully charged battery (environment temperature is 25??)

Recharge time: 8 hours

5. Environment

Temperature

Operation: 0°C ~ 45 °C   

Transportation and storage: -20°C ~ 60 °C

Humidity

Operation: 15% – 95 %( noncondensing)   

Transportation and storage: 10% – 95 % (noncondensing)   

Altitude

Operation: 86 KPa ~106 KPa

Transportation and storage: 50KPa~106 KPa

6. Parameter Specifications

SpO2

Patient: Adult, pediatric,neonate

Range: 0% – 100%

Resolution: 1 %

Accuracy: 70% – 99%: ±2 %

 0% – 69%: Unspecified

PR

Range: 0 bpm ~250bpm

Resolution: 1bpm

Accuracy: ±2bpm

TEMP

Channel: 1

Input: Body surface thermal-sensitive resistor temperature sensor    

Range: 0????50??

Resolution: 0.1??

Accuracy: ±0.2??