x-ray lead screen EKONLR03 | X-ray Protective Screens for sale

Quick Details

• Properties: x-ray lead screen EKONLR03 | X-ray Protective Screens
• Brand Name: MSL
• Model Number: EKONLR03
• Place of Origin: China (Mainland)
• protective lead rubber sheet: radiation protection material

Specifications

Wardray Premise X-ray Protective Screens are manufactured from a series of solid panels with a lead core faced on both sides by plastic laminate. Fixed angle joints are fully lead protected. Hinged wings are available with full protection and are fitted with a foot operated door holder.

The minimum recommended height is 2000mm in a panoramic style with 1000mm high solid panels and 1000mm high lead glass to the top edge. As all screens are purpose made any other combination of solid panel and glass can be accommodated. We recommend that using lead glass in stock sizes will eliminate waste and offer a more cost effective solution.

Lead Foil Screens

Lead foil screens are often used to enhance the radiograph when using X-rays in the range of 150 to 400 kV. The screens increase the exposure of the film largely due to electrons emitted by the screens during an exposure. The following are a few experiments that can be performed to investigate the effects of lead foil screens.

Experiment #1 - Using Lead Foil Screens

Locate a plate of steel approximately ¼ inch thick and 4 inches wide by 5 inches long. Drill a number of holes in the plate.

Load a film cassette with a type 1 film.

Load a second film cassette with a second piece of film and place a 0.005 inch thick lead screen on the source side and a 0.010 inch thick lead screen on the backside.

Place the steel plate of the film cassette and expose the film at 150 kV to create a radiograph with a density of 2.0 to 3.0.

Radiograph the plate a second time using the film pack with screens. Expose the material at similar kV / mA settings but the exposure time will need to be increased since the lead will absorb a portion of the long wavelength radiation.

Process the films and compare on the viewer to determine if the lead produced a sharper, higher contrast radiograph.

More contrast and definition should be seen in the image produce with the screens.

Load a film cassette with a piece of type 1 film and a lead foil screen on the source side.

Cover the half of the film with a thick lead sheet to prevent it from being exposed.

Place a hacksaw blade or other object with fine detail on the source side of the cassette in the area not covered by the thick lead sheet.

Expose this half of the film to produce a density of 2.0 to 3.0.

Return to the dark room and place a couple of pencil in the cassette to separate the screen from the section of unexposed film. Put one of the pencils near the center and the other near one edge of the film so that the hacksaw blade can be imaged between them.

Cover the previously exposed half of the film with a thick lead sheet to prevent it from being exposed a second time.

Place a hacksaw blade or other object with fine detail on the source side of the cassette in the area not covered by the thick lead sheet.

Make a second exposure using the same equipment settings used to produce the first.

Process and compare the two exposures.

Experiment #3 - Effects of Scratches and Other Artifacts on Lead Foil Screens.

Use a sharp object to scratch a line or pattern into an old lead screen.

In another area of the screen place a dime-sized spot of glue and let dry

Load a piece of film and the screen into a cassette. Place the lead source side to the film and place a small shred of tissue paper or sewing thread between the film and the lead.

Exposure the film to produce a density of between 2.0 and 3.0.

Develop the film and determine the results of the scratch, foreign material, and glue on the exposed film

Hospital or medical rubber sheet CE approved

We supply professional quality x-ray protections,such as lead sheet, lead rubber sheet: 0.0010.125mmpb, 0.175mmpb, 0.25mmpb, 0.35mmpb, 0.50mmpb, 0.75mmpb, 1mmpb, 2mmpb, 3mmpb, 4mmpb, etc...

Adopting the newest compounding and design, it has reached the leading level of being the most light, thin and soft materials of the world. Having even distribution of the lead, the performance of the protection is perfect. Under the normal use, the lead equivalent will not attenuate. It is wearable.

Other X-ray accessories:

Full body radiation protective suit | Radiation proof suit - EKONLS01

X-ray lead gloves | Nuclear gloves - EKONRS04

Lead leg pads | X ray foot guard - EKONRS02

Cheap X-ray lead glasses for sale - EKONLG02

4 Casters X-ray lead screen - EKONLD02

Discount Medical x-ray film with CE for sale - EKONMF01

Developing solution | Film developing liquid - EKONDS01

Green sensitive x ray film with CE for sale - EKONMF02

X ray lead glass | X ray protection glass - EKONLG01

Lead free apron | x-ray protection clothing - EKONLA01

X-ray intensifying screen - EKONMF04

X ray lead protective aprons-EKONLA04

Lead foil sheet or rolled lead sheet - EKONLS02

X-ray film cassette - EKONMF03

MSL TEAM picture